TP-LINK Wireless-N Router (TL-WR743ND)

gambar TP-LINK-Wireless-N-Router-TL-WR743ND

150Mbps Wireless AP/Client Router

  • Wireless ISP function provides the wireless Internet access in areas with on wired ISP infrastructure
  • Easily setup a WPA encrypted secure connection at a push of the WPS button
  • WAN Port supports up to 30 meters (100 feet) Passive Power over Ethernet
  • WDS wireless bridge provides seamless bridging to expand your wireless network

TP-LINK’s TL-WR743ND Wireless AP/Client Router is specially designed for Wireless ISP users, enabling wireless access to the Internet in areas with no wired ISP infrastructure (such as cable or xDSL). With multiple integrated functions, TL-WR743ND can also serve as a normal wireless router or an access point. What’s more, it supports Passive Power over Ethernet, convenient for deployment in areas without power outlets, such as a backyard or outdoor environments.

Client Router Mode – WISP Client

TP-LINK’s TL-WR743ND is designed to be set in Client Router mode as its default wireless mode to support a WISP connection. When it works as a WISP client device to access the Internet, local computers can connect to TL-WR743ND via wireless or cables.

150Mbps Wireless N – Speed & Range

Complying with the IEEE 802.11n standard, the TL-WR743ND can establish a wireless network and get up to 9x the speed and 4x the range of legacy IEEE 802.11g products. With transmission rates up to 150Mbps, users can experience a more fluid Internet surfing experience, including sharing files, streaming media and making Internet calls.

Passive PoE Support – Flexible Deployment

The TL-WR743ND is equipped with a RJ-45 WAN port, which is designed to support Passive PoE. For users that require a better WISP signal and need to place the device at location without power outlets, such as an attic or garage, the TL-WR743ND will fit the bill flawlessly with up to 30 meter Power over Ethernet capability. Users can easily have the most flexible deployment and don’t have to be tethered to any outlets!

Baca Juga  TP-LINK Wireless-N Router (TL-WR741ND)

WPS Button – One Button Setup Security

The TL-WR743ND features Wi-Fi Protected Setup (WPS) that allows users to almost instantly setup their security simply by pressing the “WPS” button automatically establishing a WPA2 secure connection, which is more security compared with WEP encryptions. Not only is this faster than normal security setups but more convenient in that you don’t need to remember a password!


Specifications TP-LINK Wireless-N Router (TL-WR743ND)


150Mbps wireless data rates ideal for video streaming, online gaming and internet calling  

AP Client Router Mode supports WISP connection, providing local network sharing wirelessly or via cables  

Supports up to 30 meters Power over Ethernet capability for flexible deployment  

Easily set up powerful and robust security at a push of the QSS button  

WDS wireless bridge provides seamless bridging to expand your wireless network  

IP QoS ensures smooth video streaming or lag-free online gaming experience  

Built-in NAT and DHCP server support static IP address distributing  

Supports PPPOE, Dynamic IP, Static IP, L2TP, PPTP, BigPond Cable Internet access  

Supports Virtual Server, DMZ, UPnP, DDNS, Static Routing, VPN Pass-through  

Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) authentication  

Supports configuration backup/restore and firmware upgrades  

Fully compatible with all IEEE 802.11n/b/g products  

Detachable antenna allows for stronger antenna upgrades (RP-SMA connector)  

Data Rates

Up to 150Mbps 

Standards Protocol

IEEE 802.11a, 802.11b, 802.11g, 802.11n 

Antarmuka / Interface

1x WAN Port (RJ-45), Support Passive PoE  

4x LAN Switch Port (RJ-45)  

Operating Frequency

2.4 GHz 


5dBi, Detachable Omni Directional  

Daya Keluar

20dBm (MAX) 


WEP, Wi-Fi Protected Access® (WPA-PSK, WPA2-PSK), Wireless MAC Filtering 


(174 x 30 x 111 mm) WHD