UPS Prolink PRO810S/L/SI/LI 10000VA 8000W (1P/1P) Tower

gambar UPS Prolink PRO810S-L-SI-LI

Master Series (1P/1P) – Tower
Online Master Series 1 KVA – 10 KVA
– True on-line double-conversion technology
– Single phase input and single phase output system
– Digital signal processing (DSP) technology control
– RS-232 & USB port multiple communications
– Galvanic isolation design available to provide adequate isolation

UPS Prolink PRO810S/L/SI/LI – The Master Series (1P/1P) – Tower is a true on-line double-conversion technology single-phase UPS system which provides clean, high level quality power for critical devices such as small computer centers, servers, telecom applications and industrial applications. It is available from 1KVA to 10KVA capacities with wide input voltage range and high accuracy output voltage to protect against the outages, disturbances and spikes.
The Master Series (1P/1P) – Tower is designed with a smart battery charger design to optimize battery performance. High voltage battery chargers and battery extension assembly is available for the long run time applications. Internal bypass to assure continuous power to critical devices during UPS maintenance and parallel redundancy which will back up the load in the event of critical component failure is available for the 6kVA and 10kVA models.

Key Features and Benefits
– True Double-Conversion Online UPS
– Wide input voltage range (110~300VAC)
– Input Power Factor correction 0.99
– Output Power Factor 0.80
– Generator compatible
– LCD User Interface
– RS-232 communication port or mini slot for USB / RS-232 / AS400 /
– SNMP communication
– Smart battery charger design for optimized battery performance
– Optional isolation transformer available

– Small Computer NEtwork
– Local Area Network (LAN)
– Workstations
– Server

gambar RearPanel Prolink PRO810S-L-SI-LI

Specifications Prolink PRO810S/L/SI/LI

Model: PRO810S/L/SI/LI
Volt-Amp: 10000 VA
Watt: 8000 W
Phase: Single Phase In / Single Phase Out
Isolation Transformer: Optional

Voltage Range
Low Line Transfer:
– 176VAC ±3% @ 100% Load
– 110VAC ±3% @ 50% Load
Low Line Comeback:
– 176VAC ±3% @ 100% Load
– 110VAC ±3% @ 50% Load
High Line Transfer:
– 300VAC ±3%
Low Line Comeback: 290VAC ±3%

Frequency Range: 46~54Hz or 56~64Hz
Power Factor Correction: ≥ 0.99 @ 100% Load

Output Voltage: 208/220/230/240VAC
AC Voltage Regulation (Battery Mode): >±1%

Frequency Range
Synchronized Range: 46~54Hz or 56~64Hz
Battery Mode: 50Hz ±0.1Hz or 60Hz ±0.1Hz

Current Crest Ratio: 3:1

Harmonic Distortion
Linear Load: ≤ 3% THD
Non-Linear Load: ≤ 6% THD

Transfer Time
AC Mode to Battery Mode: Line Mode: Zero
Inverter to Bypass: Line Mode: Zero

Waveform (Battery Mode): Pure Sinewave

Power Factor: 0.8

AC Mode: 89%
Battery Mode: 88%
ECO Mode: 97%

Standard Model
Battery Type: 12V9AH
Numbers of Battery: 20
Typical Recharge Time: 9 hours recover to 90% capacity
Charging Current (max.): 1A
Charging Voltage: 273.0VDC ±1%

Long-Run Model
Battery Type: Depending on Applications
Numbers of Battery: 18~20
Charging Current (max.): 4A
Charging Voltage: 273.0VDC ±1%

LCD Panel: UPS Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer, Fault Conditions

Battery Model: Sounding every 4 seconds
Low Battery: Sounding every seconds
Overload: Sounding twice every seconds

Fault: Continuously sounding

Standard Model
Dimension (mm) D×W×H: 592×250×576
Net Weight (kgs): 83

Long-Run Model
Dimension (mm) D×W×H: 592×250×576
Net Weight (kgs): 27

Humidity: 20-90% Relative Humidity @ 0~40°C (Non-Condensing)
Noise Level: Less than 58dB @ 1 Meter
Regulations: EN 62040-1-1:2003, EN 62040-2:2006, EN 61000-2-2:2002, EN 61000-4

Smart RS232: Support Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC

Package Content
Included: Please contact regional sales staff for details.

Warranty: Please refer Service Policy and Warranty.

Kata Kunci Terkait:
UPS PRolink PRO810S/L/SI/LI, jual PRO810S/L/SI/LI, harga PRO810S/L/SI/LI, spesifikasi PRO810S/L/SI/LI, beli PRO810S/L/SI/LI, servis PRO810S/L/SI/LI, baterai PRO810S/L/SI/LI