Gambar PRO8015-ERS/ERL 1.5KVA

PROLINK Master II Series (1P/1P) Rack / Tower

Prolink Master II Series (1P/1P) Rack / Tower Type is a true online double conversion single phase UPS system which is designed to deliver clean and high quality electrical power to fully protect critical devices in wide range of applications. High input power factor correction in the system improves the efficiency and reduces overall losses. UPS is equipped with 3-stage smart charging design to optimize battery performance. This feature extends the useful service life of battery and optimizes battery recharge time. The front panel LCD display comes with rotation feature which to be used for both rack and tower types. The UPS systems have USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relay contact cards. SNMP option is also available for power management via SNMP manager and web browser. Prolink Master II series (1P/1P) Rack /Tower p.f 0.9 Type is available in capacities ranging from 1KVA to 3KVA. In addition, Emergency Power Off (EPO) function is also available for the UPS models and which is used to protect the personnel and the equipment in case of fire outbreak or other types of emergency.

– USER-FRIENDLY AND EASY-SHIFT LCD DISPLAY
– TRUE DOUBLE-CONVERSION
– OUTPUT POWER FACTOR 0.9
– EMERGENCY POWER OFF (EPO) FUNCTIONG
– 50/60HZ FREQUENCY CONVERTER MODE
– PROGRAMMABLE POWER MANAGEMENT OUTLETS

Key Features
• True double-conversion online UPS
• Output power factor 0.9
• User-friendly and easy-shift LCD display
• Rack/Tower design
• Programmable power management outlets
• 50/60 Hz frequency converter mode
• ECO and advanced ECO mode for energy saving
• Emergency Power O Function (EPO)
• Hot-swappable battery design

Specifications PRO8015-ERS/ERL 1.5KVA

GENERAL
UPS Type : Rack / Tower
Phase : Single phase with ground
Rating (VA) : 1500
Nominal Power (W) : 1350
Standard Model Dimension (mm) : 510 x 438 x 88 [2U] (D x W x H)
Weight (kg) : 17.6
Long-run Model Dimension (mm) : 510 x 438 x 88 [2U] (D x W x H)
Weight (kg) : 10.7

INPUT
Connection Type : IEC 320-C14
Nominal Voltage : 200/208/220/230/240 VAC
Voltage Range : 55-150 VAC ± 5% 110-300 VAC ± 5%
Frequency Range : 40Hz ~ 70Hz
Power Factor : ≧0.99

OUTPUT
Connection Type : 8 x IEC 320-C13
Nominal Voltage : 200/208/220/230/240 VAC
Voltage Regulation : ±1%
Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz
Frequency Range (Batt. Mode) : 50 Hz ± 0.5% or 60Hz ± 0.5%
Current Crest Ratio : 5:1 (max.)
Harmonic Distortion : ≦2% THD (Linear load) ≦4% THD (Non-linear load)

ALARM & INDICATORS
Battery Mode : Sounding every 4 seconds
Low Battery : Sounding every second
Overload : Sounding twice every second
Fault : Continuously sounding
LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault

CONNECTIVITY, CONTROL & MONITORING
Front panel : Status LED, Function keys, LCD display
Communication : Smart RS232* USB Port Emergency Power Off (EPO)

BATTERY
Standard Model Type : 12V / 9Ah
Numbers : 3
Typical Recharge Time : 4 hours recover to 90% capacity
Long-run Model Type : Depending on the capacity of external batteries
Numbers : Depending on the capacity of external batteries
Charging Current (max) : 1A / 2A / 4A / 8A

Rear Panel 1-3KVA
1. Programmable outlets: connect to non-critical loads
2. Output receptacles: connect to mission-critical loads
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. Intelligent slot
10. External battery connector
11. Cooling Fan