APC Easy UPS On-Line SRV 3000VA 230V Extended Runtime Model, No Battery
SRVPM3KIL Features
Key Features
-Run time for load : Min-max: 240-2400 W 2400 W —
-Max. Capacity Used : 100%
-Output power capacity : 2.4kWatts / 3.0kVA
-Output Connections : (1) IEC 60320 C19 (Battery Backup), (6) IEC 60320 C13 (Battery Backup)
-Nominal Output Voltage 230V
-Nominal Input Voltage : 230V
-Input Connections : IEC 60320 C14
APC Easy UPS On-Line SRV 3000VA 230V Extended Runtime Model, No Battery
-High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
-Includes: CD with software, USB cable, User manual
-Automatic internal bypass-
-Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
-Automatic restart of loads after UPS shutdown-
A-utomatically starts up the connected equipment upon the return of utility power.
-ECO Mode-
-Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
-Input power factor correction-
-Minimizes installation costs by enabling the use of smaller generators and cabling.
-Intelligent battery management-
-Maximizes battery performance, life, and reliability through intelligent, precision charging.
-Intelligent Card Slot-
-Customize UPS capabilities with management cards.
-LCD graphics display-
-Text and mimic diagrams that display modes of operation, system parameters and alarms.
-Serial connectivity-
-Provides management of the UPS via a serial port.
-USB connectivity-
-Provides management of the UPS via a USB port (not available on all models).
Easy UPS On-Line Features & Benefits
Availability
Intelligent battery management
-Maximizes battery performance, life, and reliability through intelligent, precision charging.
Features
-Input power factor correction-
-Minimizes installation costs by enabling the use of smaller generators and cabling.
Intuitive LCD interface
-Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Management Software
-Allows you to easily monitor your utility power and manage your UPS.
Pure sine wave output on battery
-Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Safety-agency approved
-Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
-Management Software
Double conversion on-line topology
-Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
ECO Mode
-Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Generator compatible
-Ensures clean, uninterrupted power to protected equipment when generator power is used.
High efficiency
-High efficiency rates that remain stable even at lower operating power levels
Manageability
LED Indicators
-Provide easy-to-read status of the unit and utility power conditions.
-Network manageable-
-Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
-Intelligent Card Slot-
-Customize UPS capabilities with management cards.
-Serial connectivity-
Provides management of the UPS via a serial port.
-LCD graphics display-
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Serviceability
Automatic self-test
-Periodic battery self-test ensures early detection of a battery that needs to be replaced.
-Disconnected battery notification-
-Warns when a battery is not available to provide backup power.
-Predictive failure notification.-
-Provides early-warning fault analysis ensuring proactive component replacement.
-Audible alarms-
-Provides notification of changing utility power and UPS power conditions
Technical Specifications
| Output | |
| Max Configurable Power (Watts) : | 2.4kWatts / 3.0kVA |
| Output Frequency (sync to mains) : | 50/60 Hz +/- 3 Hz Sync to mains |
| Other Output Voltages : | 220 V, 240 V |
| Load Crest Factor : | 3 : 1 |
| Topology : | Double conversion online |
| Waveform type : | Sine wave |
| Bypass : | Internal bypass (automatic and manual) |
| Input | |
| Input frequency : | 40 – 70 Hz Auto sensing |
| Input voltage range for main operations : | 110 – 285 Half load, 160 – 280 Full loadV |
| Number of Power Cords : | 1 |
| Other Input Voltages : | 220 V, 240 V |
| Batteries & Runtime | |
| Battery type : | Lead-acid battery |
| Nominal Battery Voltage : | 72 V |
| Efficiency : | View Efficiency Graph |
| Communications & Management | |
| Control panel : | Multifunction LCD status and control console |
| Audible Alarm : | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Surge Protection and Filtering | |
| Surge energy rating : | 600Joules |
| Physical | |
| Maximum Height : | 336MM, 33.6CM |
| Maximum Width : | 190MM, 19.0CM |
| Maximum Depth : | 425MM, 42.5CM |
| Net Weight : | 26.8KG |
| Shipping weight : | 9.6KG |
| Shipping Height : | 330MM, 33.0CM |
| Shipping Width : | 235MM, 23.5CM |
| Shipping Depth : | 477MM, 47.7CM |
| Environmental | |
| Operating Temperature : | 0 – 40 °C |
| Operating Relative Humidity : | 0 – 95 (Non-condensing) % |
| Operating Elevation : | 0 – 3000meters |
| Storage Temperature : | -20 – 50 °C |
| Storage Relative Humidity : | 0 – 95 (Non-condensing) % |
| Storage Elevation : | 0 – 15000meters |
| Audible noise at 1 meter from surface of unit : | 50.0dBA |
| Conformance | |
| Approvals : | CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2 |
| Standard warranty : | 2 years repair or replace |
