APC Symmetra PX 125kW Scalable to 250kW

APC Symmetra PX 125kW Scalable to 250kW – SY125K250DL-PD

UPS APC SY125K250DL-PD Features
APC Symmetra PX 125kW Scalable to 250kW with Left Mounted Maintenance Bypass and Distribution

A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers and mission critical environments.

Includes: Assembly service , Installation guide , Network Management Card , Start-Up Service , User Manual

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery modules connected in parallel
Delivers higher availability through redundant batteries.

Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.

ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

LCD graphics touch screen display
Full color text and mimic diagrams that easily display modes of operation, systems parameters and alarms.

Mega Tie
During maintenance procedures, maintain full protection by transferring the load from one independent Symmetra PX 250/500kW system to another.

Output synchronization to external source
UPS systems can be synchronized with any other independent source for use with downstream static transfer switches.

Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Remote Display
Download the display interface to your laptop or personal computer. Remotely monitor the UPS and configure a sub-set of UPS parameters. Note: Remote start-up and shutdown are not supported.

Scalable runtime
Allows additional run time to be quickly added as needed.

Swappable batteries
Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Symmetra PX Features & Benefits

Agility
SmartSlot
Customize UPS capabilities with management cards.

Programmable frequency
Ensures compatibility with different input frequencies.

Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.

Total Cost of Ownership
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.

5×8 Start-up service included
Required for full coverage of factory warranty

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Availability
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Network manageable
Provides remote power management of the UPS over the network.

Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

Swappable power modules
Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.

Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.

Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.

Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.

Manageability
LED status indicators
Quickly understand unit and power status with visual indicators.

Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Audible alarms
Provides notification of changing utility power and UPS power conditions

Marketing Features
User-replaceable power modules
Enables simple upgrades and replacements of the Power Modules.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.