APC SMT3000RMI2U

gambar APC-SMT3000RMI2U

SMT3000RMI2U Features
APC Smart-UPS 3000VA LCD RM 2U 230V
– Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
– Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
– Audible alarms: Provides notification of changing utility power and UPS power conditions
– Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
– Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
– Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
– Cold-start capable: Provides temporary battery power when the utility power is out.
– Disconnected battery notification: Warns when a battery is not available to provide backup power.
– Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
– Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
– Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
– High online efficiency: Reduces utlility costs, generates less heat.
– Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
– Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
– LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
– Network manageable: Provides remote power management of the UPS over the network.
– Outlet group control: Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
– Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
– Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
– Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
– Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
– Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs.
– Serial connectivity: Provides management of the UPS via a serial port.
– Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
– StruxureWare Data Center Expert compatible: Enables centralized management via StruxureWare Data Center Expert.
– Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
– USB connectivity: Provides management of the UPS via a USB port (not available on all models).
– User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
– Wide input voltage range: Designed for harsh electrical environments to save battery life.

Smart-UPSFeatures & Benefits
Safety
– Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Adaptability
– Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
– Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Marketing Features
– Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management: Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
– Save time with easy and convenient remote accessibility: Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.
– Smarter productivity with ability to tailor to your specific application needs: Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
– Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
– Avoids costly power problems by keeping your IT equipment and data safe and available: Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems

Availability
– Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Disconnected battery notification: Warns when a battery is not available to provide backup power.
– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
– Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
– Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
– Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
– Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

Manageability
– USB connectivity: Provides management of the UPS via a USB port (not available on all models).
– Disconnected battery notification: Warns when a battery is not available to provide backup power.
– LED status indicators: Quickly understand unit and power status with visual indicators.
– Serial connectivity: Provides management of the UPS via a serial port.
– Network manageable: Provides remote power management of the UPS over the network.
– Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Serviceability
– User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
– Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
– Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
– Resettable circuit breakers: Enables a quick recovery from overload events.
– Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Specifications APC SMT3000RMI2U

Output
– Output power capacity: 2.7 KWatts / 3.0 kVA
– Max Configurable Power (Watts): 2.7 KWatts / 3.0 kVA
– Nominal Output Voltage: 230V
– Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
– Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
– Other Output Voltages: 220, 240
– Topology: Line Interactive
– Waveform type: Sine wave
– Output Connections: (3) IEC Jumpers (Battery Backup), (1) IEC 320 C19 (Battery Backup), (8) IEC 320 C13 (Battery Backup)
– Transfer Time: 4ms typical : 8ms maximum

Input
– Nominal Input Voltage: 230V
– Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
– Input Connections: British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P
– Cord Length: 2meters
– Input voltage range for main operations: 160 – 286V
– Input voltage adjustable range for mains operation: 151 – 302V
– Number of Power Cords: 1
– Other Input Voltages: 220, 240

Batteries & Runtime
– Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
– Typical recharge time: 3hour(s)
– Replacement Battery: RBC43
– Expected Battery Life (years): 3 – 5
– RBC Quantity: 1
– Battery Volt-Amp-Hour Capacity: 547

Communications & Management
– Interface Port(s): USB
– Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
– Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
– Available SmartSlot™ Interface Quantity: 1

Surge Protection and Filtering
– Surge energy rating: 320Joules

Physical
– Maximum Height: 86mm , 8.6cm
– Maximum Width: 480mm , 48.0cm
– Maximum Depth: 683mm , 68.3cm
– Rack Height: 2U
– Net Weight: 44.28kg
– Shipping weight: 51.7kg
– Shipping Height: 254mm , 25.4cm
– Shipping Width: 600mm , 60.0cm
– Shipping Depth: 980mm , 98.0cm
– Units per Pallet: 8.0

Environmental
– Operating Environment: 0 – 40 °C
– Operating Relative Humidity: 0 – 95 %
– Operating Elevation: 0-3000meters
– Storage Temperature: -15 – 45 °C
– Storage Relative Humidity: 0 – 95 %
– Storage Elevation: 0-15000meters
– Audible noise at 1 meter from surface of unit: 55.0dBA
– Online thermal dissipation: 348.0BTU/hr

Conformance
– Approvals: CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (EU), GS Mark, IRAM, RCM, VDE, WEEE
– Standard warranty: 3 years repair or replace (excluding battery) and 2 year for battery

Sustainable Offer Status
– RoHS: Compliant
– REACH: REACH: Contains No SVHCs
– PEP: Available in Documentation tab
– EOLI: Available in Documentation tab

Kata Kunci Terkait:

UPS APC SMT3000RMI2U, jual apc smt3000rmi2u, harga apc smt3000rmi2u, spesifikasi apc smt3000rmi2u, beli apc smt3000rmi2u, servis apc smt3000rmi2u

×

PT. Platindo Karya Prima

× Contact Us