APC Smart-UPS RC 3000VA 230V – SRC3000XLI

gambar APC Smart-UPS RC 3000VA 230V - SRC3000XLI


SRC3000XLI Features

APC Smart-UPS RC 3000VA 230V
High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software , Smart UPS signalling RS-232 cable , User Manual

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Smart-UPS On-Line Features & Benefits
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Serial connectivity
Provides management of the UPS via a serial port.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.
Customize UPS capabilities with management cards.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Cold-start capable
Provides temporary battery power when the utility power is out.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Audible alarms
Provides notification of changing utility power and UPS power conditions
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.

Marketing Features
Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Scalable runtime
Allows additional run time to be quickly added as needed.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Specifications APC Smart-UPS RC 3000VA 230V – SRC3000XLI



Built-in Bypass

Load Crest Factor

3 : 1

Output Voltage Distortion

Less than 3%

Efficiency at Full Load

89.0 %

Output Frequency (sync to mains)

50/60 Hz +/- 3 Hz user adjustable +/- 0.1

Output Connections

(8) IEC 320 C13 (Battery Backup)

Other Output Voltages


Max Configurable Power (Watts)

2.1 KWatts / 3.0 kVA

Output power capacity

2.1 KWatts / 3.0 kVA


Double Conversion Online

Output Voltage Note

Configurable for 220 or 230V nominal output voltage

Waveform type

Sine wave


Cord Length

2.44 meters

Efficiency at Full Load

89.0 %

Input frequency

50/60 Hz +/- 5 Hz (auto sensing)

Input voltage adjustable range for mains operation

100 – 280 V

Input voltage range for main operations

160 – 280 V

Input Breaker Capacity

20 A

Other Input Voltages


Input Connections

IEC-320 C20

Rack Height

4 U


Battery Slots Empty


Included Battery Modules


Typical recharge time

2 hour(s)

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Extendable Run Time


Replacement Battery


Battery Volt-Amp-Hour Capacity



Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Control panel

LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators

Emergency Power Off (EPO)


Interface Port(s)

DB-9 RS-232, SmartSlot

Available SmartSlot™ Interface Quantity



Output power capacity

2.1 KWatts / 3.0 kVA


Data Line Protection

RJ-45 Modem/Fax protection (four wire dual line)


Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449




Maximum Depth

457 mm , 45.7 CM

Maximum Height

175 mm , 17.5 CM

Net Weight

34.0 KG

Units per Pallet


Rack Height

4 U

Shipping Depth

597 mm , 59.7 CM

Shipping Height

337 mm , 33.7 CM

Shipping weight

37.7 KG

Shipping Width

622 mm , 62.2 CM

Maximum Width

432 mm , 43.2 CM


Audible noise at 1 meter from surface of unit

45.0 dBA

Operating Temperature

0 – 40 °C

Operating Elevation

0-3000 meters

Operating Relative Humidity

0 – 95 %

Storage Temperature

-20 – 50 °C

Storage Elevation

0-15000 meters

Storage Relative Humidity

0 – 95 %

Online thermal dissipation

652.0 BTU/hr



EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, IEC 60950, ISO 9001

Standard warranty

2 years repair or replace, optional on-site warranties available, optional extended warranties available

Sustainable Offer Status



Kata Kunci Terkait :

APC Smart-UPS RC 3000VA 230V, SRC3000XLI, jual ups apc SRC3000XLI, harga ups apc SRC3000XLI, spesifikasi ups apc SRC3000XLI, beli ups apc SRC3000XLI


PT. Platindo Karya Prima

× Contact Us