Gambar APC BR1600MI Back-UPS Pro 1600VA, 8 Outlets, AVR, LCD Interface

APC Back-UPS Pro 1600VA, 8 Outlets, AVR, LCD Interface

High Performance Computer and Electronics UPS for Premium Power Protection

Key Features BR1600MI
– Run time for load Min-max: 96-960 W 960 W 2m 38s
– Max. Capacity Used : 100%
– Output power capacity : 960 Watts / 1.6kVA
– Output Connections : (2) IEC 60320 C13 (Surge Protection) (6) IEC 60320 C13 (Battery Backup)
– Nominal Output Voltage : 230V
– Nominal Input Voltage : 230V
– Input Connections : IEC 60320 C14

Audible alarms : 
Provides notification of changing utility power and UPS power conditions
Automatic self-test : 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification : 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools : 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets : 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost and Trim Automatic Voltage Regulation (AVR) : 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable : 
Provides temporary battery power when the utility power is out.
Dataline surge protection : 
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification : 
Warns when a battery is not available to provide backup power.
Hot-swappable batteries : 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
LCD graphics display : 
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Safety-agency approved : 
The UPS is UL1778 Listed
USB connectivity : 
USB compatibility and connectivity ensures quick and easy installation of the free PowerChute Personal Edition Software.
User-replaceable batteries : 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Pro Features & Benefits

“Availability”
Green mode : 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Intelligent battery management : 
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Customizable voltage sensitivity : 
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Customizable voltage-transfer points : 
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Boost and Trim Automatic Voltage Regulation (AVR) : 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable : Provides temporary battery power when the utility power is out.
Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification : Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Transformer-block spaced outlets : Protect equipment with input transformer blocks without blocking access to other receptacles.

“Manageability”
LCD Status Display : Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
USB connection : Use your PC to access additional power protection and management features for your UPS via a USB Port.
Audible alarms : Provides notification of changing utility power and UPS power conditions
Disconnected battery notification : Warns when a battery is not available to provide backup power.

“Marketing features”
Battery-protected and surge-only outlets : 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost Automatic Voltage Regulation (AVR) : Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

“Protection” 
Battery and surge protected outlets : Back up and protect your hardware and data during power outages, surges and spikes .
Dataline surge protection : Provides protection of connected equipment from power surges on the data lines.
Surge only outlets : Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

“Safety”
Safety-agency approved : 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

“Serviceability”
Resettable circuit breaker : Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Simple battery replacement : Increases UPS availability by allowing quick, easy battery replacement.

Technical Specifications BR1600MI

Output
– Max Configurable Power (Watts) : 960 Watts / 1.6kVA
– Output Frequency (sync to mains) : 50/60 Hz +/- 1 Hz Sync to mains
– Topology : Line interactive

Input
– Input frequency : 50/60 Hz +/- 3 Hz Auto-sensing
– Input voltage range for main operations : 176 – 294V

Batteries & Runtime
– Battery type : Lead-acid battery
– Typical recharge time : 16hour(s)
– Nominal Battery Voltage : 24 V
– Replacement Battery : APCRBC166
– Expected Battery Life (years) : 3 – 5
– RBC Quantity : 1
– Battery Charge Power (Watts) : 11 Watts
– Runtime : View Runtime Graph
– Efficiency : View Efficiency Graph

Communications & Management
– Interface Port(s) : USB
– Control panel : Multifunction LCD status and control console
– Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering
– Surge energy rating : 509Joules
– Data Line Protection : RJ45 10/100/1000 Base-T Ethernet protection
– Filtering : Full time multi-pole noise filtering : 10% of IEEE surge let– through : zero clamping response time: instantaneous

Physical
– Maximum Height : 100MM, 10.0CM
– Maximum Width : 250MM, 25.0CM
– Maximum Depth : 382MM, 38.2CM
– Net Weight : 10.9KG
– Shipping weight : 11.65KG
– Shipping Height : 330MM, 33.0CM
– Shipping Width : 485MM, 48.5CM
– Shipping Depth : 225MM, 22.5CM
– Color : Black
– Master Carton Dimensions (Length x Width x Height) : 9144 x 1283 x 6502MM
– Master Carton Units : 1.0
– Master Carton Weight : 13.4
– SCC Codes : 10731304346910

Environmental
– Operating Temperature : 0 – 40 °C
– Operating Relative Humidity : 0 – 95 (Non-condensing) %
– Operating Elevation : 0 – 3048meters
– Storage Temperature : -15 – 45 °C
– Storage Relative Humidity : 0 – 95 (Non-condensing) %
– Storage Elevation : 0 – 15240meters
– Audible noise at 1 meter from surface of unit : 45.0dBA
– Online thermal dissipation : 22.0BTU/hr

Conformance
– Approvals : A-Tick, C-Tick, CE, EAC, GS Mark, RCM, TISI
– Standard warranty : 2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status
– RoHS : Compliant

×

PT. Platindo Karya Prima

× Contact Us