APC Smart-UPS RT 5000VA 230V
APC Smart-UPS On-Line,3500 Watts /5000 VA,Input 230V /Output 230V, Interface Port RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, Extended runtime model, Rack Height 3 U
Includes: CD with software, User Manual, Web/SNMP Management Card
Smart-UPS On-Line Features & Benefits
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
5000VA / 3500W
Input Frequency : 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections : Hard Wire 3-wire
Input voltage range for main operations : 160 – 280V
Surge Energy Rating
Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449
Antarmuka / Interface
1x Serial RJ-45 Port
Maintenance-free sealed Lead-Acid battery withn suspended electrolyte : leakproof
Internal Battery : 18 Minutes
Internal Battery + 1 SURT192XLBP : 70.2 Minutes
Internal Battery + 2 SURT192XLBP : 125.8
Internal Battery + 3 SURT192XLBP : 183.5 Minutes
Internal Battery + 4 SURT192XLBP : 242.8 Minutes
Internal Battery : 6.3 Minutes
Internal Battery + 1 SURT192XLBP : 31.2 Minutes
Internal Battery + 2 SURT192XLBP : 57.8 Minutes
Internal Battery + 3 SURT192XLBP : 85.4 Minutes
Internal Battery + 4 SURT192XLBP : 113.8 Minutes
(130 x 432 x 660 mm) WHD
APC PowerChute Smart-UPS Bundle
Optional Rail Kit SKU00506069
Pre-Installed SmartSlot™ Cards: AP9631
Kata Kunci Terkait :
APC SMT3000i SMT3000IFeatures APC Smart-UPS 3000VA LCD 230V – Cold-start capable: Provides temporary battery power when the utility power is out. – Energy meter: Provides actual kilowatt hours of usage for energy conscious users. – Green mode: Patent-pending operating mode... Selengkapnya
APC SRT192BP – 192V 5kVA and 6kVA Battery Pack APC SRT192BP Features APC Smart-UPS SRT 192V 5kVA and 6kVA Battery Pack Includes : Documentation CD , Installation guide , Warranty card Specifications APC SRT192BP Batteries & Runtime Battery type: Maintenance-free... Selengkapnya
APC Symmetra PX 125kW Scalable to 250kW – SY125K250DL-PD UPS APC SY125K250DL-PD Features APC Symmetra PX 125kW Scalable to 250kW with Left Mounted Maintenance Bypass and Distribution A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and... Selengkapnya
Silahkan pilih kategori artikel yang ingin Anda telusuri.