Beranda » Switch » HP ProCurve E2910-24G-PoE+ (J9146A)

HP ProCurve E2910-24G-PoE+ (J9146A)

T Diposting oleh pada 5 November 2014
F Kategori ,
b Belum ada komentar
@ Dilihat 446 kali

HP ProCurve E2910-24G-PoE+ (J9146A)

gambar HP-ProCurve-E2910-24G-PoE-J9146A

The HP 2910 al Switch Series consists of four switches: the HP 2910-24G al and 2910-24G-PoE+ al Switches with 24 10/100/1000 ports, and the HP 2910-48G al and 2910-48G-PoE+ al Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910 al Switch Series supports up to four optional 10 Gigabit Ethernet (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.

  • High-performance Gigabit Ethernet access switch
  • Four optional 10 GbE (CX4 and/or SFP+) ports
  • IEEE 802.3af/802.3at functionality ( PoE/PoE+)
  • Layer 2 and Layer 3 plus static IP and RIP routing
  • Lifetime warranty, sFlow, ACLs, and rate limiting


Specifications HP ProCurve E2910-24G-PoE+ (J9146A)


20 auto-sensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T), Media Type: Auto-MDIX, Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full
only; 4 dual-personality ports, each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers); 1 RJ-45 serial console port; Supports a maximum of 4 10-GbE ports

Media interfaces




Switching features

10 Gbps Ethernet connectivity:

up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+), with optional interconnect kit for short-distance connectivity. IPv6: IPv6 host: allows the switches to be managed and deployed at the edge of IPv6 networks . Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network. IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-comp

High-performance architecture:

128 Gbps switching fabric with up to 95 Mpps (24-port switches) and 176 Gbps switching fabric with up to 131 Mpps (48-port switches). Selectable queue configurations: increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications.

EEE 802.1s Multiple Spanning Tree:

provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w. IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk. Optional redundant power supply: supplies backup power in case of power failure (Note: HP E620 Redundant/External Power Supplyprovides only RPS functionality).

RMON, XRMON, and sFlow:

provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events. Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices. Command authorization: leverages RADIUS to link a custom list of CLI commands to individual network administrator’s login; it also provides an
audit trail. Dual flash images: provides independent primary and secondary operating system files for backup while upgrading.

Power Supply

Input Voltage

100-127 / 200-240 VAC

Input Operating Current

6.1 / 3.1 A

Input Frequency

50 / 60 Hz


hp procurve e2910-24g-poe (j9146a), hp procurve e2910-24g-poe

Belum ada Komentar untuk HP ProCurve E2910-24G-PoE+ (J9146A)

Silahkan tulis komentar Anda

Your email address will not be published. Required fields are marked *


a Artikel Terkait HP ProCurve E2910-24G-PoE+ (J9146A)

HP 2620-24-PPoE+ [J9624A]

HP 2620-24-PPoE+ [J9624A]

T 25 September 2014 F A admin

Spesifikasi HP 2620-24-PPoE+ [J9624A] Ports 12 x 10/100 Ports RJ-45 12 x 10/100 Ports RJ-45 PoE+ 1 RJ-45 serial console port 2 x 10/100/1000 Ports RJ-45 2 x SFP Slots Media interfaces RJ-45 Manageable Yes Power Supply 28 W (maximum)... Selengkapnya

gambar CISCO-Switch-Managed-WS-C3750X-24P-S

CISCO Switch Managed (WS-C3750X-24P-S)

T 7 November 2014 F , A admin

CISCO Switch Managed (WS-C3750X-24P-S) The Cisco Catalyst 3750-X series switches are an enterprise-class line of stackable switches. These switches provide high availability, scalability, security, energy efficiency, and ease of operation with features such as Cisco StackPower, IEEE 802.3at Power over... Selengkapnya

HP Managed Switch 2620-24-PpoE+ (J9625A)

HP Managed Switch 2620-24-PpoE+ (J9625A)

T 5 November 2014 F , A admin

HP Managed Switch 2620-24-PpoE+ (J9625A) The HP 2620 Switch Series consists of five switches with 10/100 connectivity. The HP 2620-24 Switch is a fanless switch with quiet operation, making it ideal for deployments in open spaces.The HP 2620-24-PPoE+ Switch, HP... Selengkapnya